To calculate how many bags of concrete you need for an 3×10 slab, you’ll first need to determine the thickness of the slab you want. Standard concrete slabs are typically 4 inches thick, but you may want a different thickness depending on your project.

Concrete is a blended mix of Portland cement, sand, aggregate, water with approve ingredient. Cement is acts as binder or adhesive materials to bind the components of concrete all together to create workable paste. Sand acts as filler material that fills the voids and gap between components of concrete and remove the air. Aggregate, stone, or gravel used to strengthen the concrete strength.

To determine how many bags of premixed concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: A 40 pound bag yields 0.011 cubic yards, 60 pound bag yields 0.017 cubic yards, 50 pound bag yields 0.0138 cubic yards and 80 pound bag yields 0.022 cubic yards.

If you measure their yields in cubic feet, then yields per each bag size are following: A 40 pound bag yields 0.30 cubic feet, 60 pound bag yields 0.45 cubic feet, 50 pound bag yields 0.375 cubic feet and 80 pound bag yields 0.60 cubic feet.

To figure the amount of yards of concrete you will need, take the all measurements Length in feet, width in feet and thickness in inches. Convert thickness in feet. Multiply its length, width and thickness to get cubic footage. Multiply the total cubic footage by 0.037 to get total yards of concrete needed.

**How many bags of concrete do i need for a 3×10 slab**

If you have a 3×10 slab, you would need approximately either 13 80-pound, or 17 60-pound (0.278 yards, or 7.5 cubic feet) bags of premixed concrete at 3 inches thick, 17 80-pound, or 23 60-pound (0.37 yards, or 10 cubic feet) bags of premixed concrete at 4 inches thick, 21 80-pound, or 28 60-pound (0.4625 yards, or 12.5 cubic feet) bags of premixed concrete at 5 inches thick, or 25 80-pound, or 34 60-pound (0.555 yards, or 15 cubic feet) bags of premixed concrete at 6 inches thick.

**How many bags of concrete do i need for a 3×10 slab at 3 inches thick**

At 3 inches thick, for a 3×10 slab you would need approximately either 13 80-Pound, 17 60-pound, or 25 40-pound bags of premixed concrete. If you measure in yards, 0.278 cubic yards (7.5 cubic feet) of concrete will be required.

**Let’s do calculation and proceeds following steps:**

● 3″ thickness in feet = 3/12 = 0.25′

● Volume of concrete in cubic feet = 3 × 10 × 0.25 = 7.5

● Volume of concrete in yards = 7.5 × 0.037 = 0.278 yards.

● No. of 80lb bags = 7.5/0.60 = 13 bags

● No. of 60lb bags = 7.5/0.45 = 17 bags

● No. of 40lb bags = 7.5/0.30 = 25 bags.

**How many bags of concrete do i need for a 3×10 slab at 4 inches thick**

At 4 inches thick, for a 3×10 slab you would need approximately either 17 80-Pound, 23 60-pound, or 34 40-pound bags of premixed concrete. If you measure in yards, 0.37 cubic yards (10 cubic feet) of concrete will be required.

**Let’s do calculation and proceeds following steps:**

● 4″ thickness in feet = 4/12 = 0.333′

● Volume of concrete in cubic feet = 3 × 10 × 0.333 = 10

● Volume of concrete in yards = 10 × 0.037 = 0.37 yards.

● No. of 80lb bags = 10/0.60 = 17 bags

● No. of 60lb bags = 10/0.45 = 23 bags

● No. of 40lb bags = 10/0.30 = 34 bags.

**◆You Can Follow me on Facebook and**

**Subscribe our Youtube Channel**

**How many bags of concrete do i need for a 3×10 slab at 5 inches thick**

At 5 inches thick, for a 3×10 slab you would need approximately either 21 80-Pound, 28 60-pound, or 42 40-pound bags of premixed concrete. If you measure in yards, 0.4625 cubic yards (12.5 cubic feet) of concrete will be required.

**Let’s do calculation and proceeds following steps:**

● 3″ thickness in feet = 5/12 = 0.417′

● Volume of concrete in cubic feet = 3 × 10 × 0.417 = 12.5

● Volume of concrete in yards = 12.5 × 0.037 = 0.4625 yards.

● No. of 80lb bags = 12.5/0.60 = 21 bags

● No. of 60lb bags = 12.5/0.45 = 28 bags

● No. of 40lb bags = 12.5/0.30 = 42 bags.

**How many bags of concrete do i need for a 3×10 slab at 6 inches thick**

At 6 inches thick, for a 3×10 slab you would need approximately either 25 80-Pound, 34 60-pound, or 50 40-pound bags of premixed concrete. If you measure in yards, 0.555 cubic yards (15 cubic feet) of concrete will be required.

**Let’s do calculation and proceeds following steps:**

● 6″ thickness in feet = 6/12 = 0.5′

● Volume of concrete in cubic feet = 3 × 10 × 0.5 = 15

● Volume of concrete in yards = 15 × 0.037 = 0.555 yards.

● No. of 80lb bags = 15/0.60 = 25 bags

● No. of 60lb bags = 15/0.45 = 34 bags

● No. of 40lb bags = 15/0.30 = 50 bags

**Cost estimate for a 3×10 slab**

For the most part, the typical concrete slab price range of $4 to $8 per square foot includes labor. A 3×10 slab is a 30 square foot. Using ready-mix concrete to cover 3×10 (30 sq ft) at a depth of 4″ to 6″-8″, the estimated cost is range between $120 to $240 (30× $4 = $120 or 30×$8 = $240).

**How much does a 3’×10’×4″ concrete slab cost?**

Pouring a concrete slab may cost between $4 and $8 per square foot. A 4″ thick slab will cost an average cost of $4 per square foot. Based on the national average, a 3’×10’×4″ (30 square feet) concrete slab may cost about $120 (30 times $4 = $120).

**How much does a 3’×10’×5″ concrete slab cost?**

Pouring a concrete slab may cost between $4 and $8 per square foot. A 5″ thick slab will cost an average cost of $5 per square foot. Based on the national average, a 3’×10’×5″ (30 square feet) concrete slab may cost about $150 (30 times $5 = $150).

**How much does a 3’×10’×6″ concrete slab cost?**

Pouring a concrete slab may cost between $4 and $8 per square foot. A 6″ thick slab will cost an average cost of $6 per square foot. Based on the national average, a 3’×10’×6″ (30 square feet) concrete slab may cost about $180 (30 times $6 = $180).

**How much does a 3’×10’×8″ concrete slab cost?**

Pouring a concrete slab may cost between $4 and $8 per square foot. A 8″ thick slab will cost an average cost of $8 per square foot. Based on the national average, a 3’×10’×8″ (30 square feet) concrete slab may cost about $240 (30 times $8 = $240).

**How many bags of concrete do i need for a 5×10 slab**

**How many bags of concrete do i need for a 12×24 slab**

**How many yards of concrete do i need for a 24×30 slab**

**How many bags of concrete do i need for a 2×4 slab**

**How many bags of concrete do i need for a 15×15 slab**

**Conclusions:**

If you have a 3×10 slab with 4″ thick, you would need approximately either 17- 80lb, or 23- 60lb (0.37 yards, or 10 cubic feet) bags of premixed concrete which will cost an average of $120 including labour.