How much gravel for 1000 foot driveway | how to figures tons of gravel for driveway | how many tons of gravel do i need for my driveway | how much gravel for 100 foot driveway | how many yards of gravel do i need for driveway.

The amount of gravel needed for a 1000-foot driveway can vary depending on several factors, including the desired thickness of the gravel layer and the type of gravel you plan to use. Typically, a gravel driveway needs a depth of 4 to 6 inches of gravel to provide adequate coverage.

Assuming a depth of 4 inches, you would need approximately 83.33 cubic yards of gravel for a 1000-foot driveway. If you choose a depth of 6 inches, you would need around 125 cubic yards.

A driveway is a type of private road, also called “drive” in UK english, used for local access to one or a small group of structures, made by using gravel and is owned and maintained by an individual or group. It has rarely have traffic lights, but some that bear heavy traffic, especially those leading to commercial businesses and parks, do.

Gravel is one of the most important building material collected from river basin, mountains, rocks, small rocks, pebbles, loose and dry sand, aggregate and pea gravel. Pea gravel is chosen best for walkway because it is round in shape of small size which make it most comfortable to work on. Gravel is made of rock is to build roads, path, driveway, Patio, pedestrian, pavement, pathways, roadways, landscaping, and etc.

When estimating the amount of gravel you need to cover your driveway, your required gravel quantity will depend on the type of gravel you choose, like pea or crushed gravel. Different grades are found in particles from fine to course, ranging from 2 to 64mm. The volume of gravel must also be calculated according to the size of the rocks. Choose the gravel you’d like to use before digging the depth of your driveway, and then figure out how much you will need by using simple calculations.

Depth of driveway is taken as 2 to 4 inches thick, at 2″ deep by using 1/4″ to 1/2″ size of gravel, it will cover around 100 square feet per ton, 1/2″ to 1 inch gravel will cover 90 square feet per ton, and 1 1/2″ to 2″ gravel will cover 80 square feet per ton.

**How to figures tons of gravel for driveway**

To figures tons of gravel for driveway, measure the driveway in cubic feet by multiply the length by width by depth in feet, results will be divided by 27 to get quantity in cubic yards, you can multiply your total cubic yards by 1.5 to get gravel quantity in tons, because one cubic yard of gravel is equal to 1.5 tons approximately.

Or, To convert cubic feet to tons of gravel, divide the cubic feet of your projects by 21.6. The calculation is 100 feet long × 10 feet wide × 0.5 feet deep = 500 cubic feet/21.6 = 23 Tons of gravel.

For example:- if your driveway is 10 foot long by 10 foot wide by 2″ high, you do the following calculation:- 1) 2″ deep in feet = 2÷12 = 0.166 feet, 2) gravel quantity in cubic feet = 10’×10’×0.166′ = 16.6 cubic feet, 3) gravel quantity in yards = 16.6÷27 = 0.62 yards, and 3) gravel quantity in tons = 0.62×1.5 = 0.93 tons. Thus, you will need approximately 1 ton of gravel for 100 square foot driveway at 2″ deep, if you are using 1/4″ to 1/2″ size of screened gravel for your driveway.

**How to figures yards of gravel for driveway**

To figures yards of gravel for driveway, measure the driveway in cubic feet by multiply the length by width by depth in feet, results will be divided by 27 to get quantity in cubic yards, because one cubic yard of gravel is equal to 27 cubic feet.

Crushed stone is a common material to use for a driveway because it offers a nice clean look, is resistant to weeds, is affordable, is easy to maintain, and is easy to install. Gravel is commonly sold by the cubic yard, so to find the material needed for a driveway, you need to find the volume in yards.

For example: if your driveway is 100 foot long by 10 foot wide by 4″ deep, you do the following calculation:- 1) 4″ deep in feet = 4÷12 = 0.33 feet, 2) gravel quantity in cubic feet = 100’×10’×0.33′ = 330 cubic feet, 3) gravel quantity in yards = 330 ÷27 = 12.2 cubic yards.

**How much gravel for 1000 foot driveway**

Depth of gravel driveway is at least 4 inches thick, you do the calculation how much gravel do you for your 1,000 foot driveway and 12 feet wide as a good average.

To calculate gravel quantity for 1,000 foot long and 12 feet wide driveway, you do the following calculation:-

1) 4″ deep in feet = 4÷12 = 0.33 feet

2) volume of gravel in cubic feet = square footage × depth in feet = 1000× 12 × 0.33 = 3960 cubic foot

3) volume of gravel in yards = 3960 ÷ 27 = 146.6 yards

4) Gravel quantity in tons = 146.6 ×1.5 = 220 tons

5) Always buying @10% extra for waste

6) 1″ top covering will need about 37 cubic yards or approximately 55 tons.

You would need approximately 4960 cubic feet, or 184 cubic yards, or 275 tons of gravel for 1000 foot long & 12 feet wide driveway, if you are using 1/4″ to 1″ size of gravel for 4″ base of pit run gravel and 1″ of top covering.

**How much gravel for 100 foot driveway**

To calculate gravel quantity for 100 foot long and 12 feet wide driveway, you do the following calculation:-

1) 4″ deep in feet = 4÷12 = 0.33 feet

2) volume of gravel in cubic feet = square footage × depth in feet = 100× 12×0.33 = 396 cubic foot

3) volume of gravel in yards = 396 ÷ 27 = 14.66 yards

4) gravel quantity in tons = 14.66×1.5 = 22 tons,

5) always buying @10% extra for waste

6) 1″ top covering will need about 3.7 cubic yards or approximately 5.5 tons.

You would need approximately 496 cubic feet, or 18.4 cubic yards, or 27.5 tons of gravel for 100 ft (foot) long & 12 feet wide driveway, if you are using 1/4″ to 1″ size of gravel for 4″ base of pit run gravel and 1″ of top covering.

**How much gravel for 50 foot driveway**

You would need approximately 250 cubic feet, or 9.26 cubic yards, or 14 tons of gravel for 50 ft (foot) long & 12 feet wide driveway, if you are using 1/4″ to 1″ size of gravel for 4″ base of pit run gravel and 1″ of top covering.

**Maths calculation:-**

1) Cubic feet of gravel = 50′ × 12′ × 5/12″ = 250 cubic feet

2) Cubic yards of gravel = 250/ 27 = 9.26 cubic yards

3) Tons of gravel = 9.26 × 1.5 = 14 tons

**“How many bags of concrete is in a yard**

**“How to figure yards, cubic feet or bag of dirt**

**“How to figure yards of gravel**

**“How many bags of gravel in a cubic yard**

**“How much does a yard of mulch cover**

**How much gravel for 150 foot driveway**

You would need approximately 750 cubic feet, or 28 cubic yards, or 42 tons of gravel for 150 ft (foot) long & 12 feet wide driveway, if you are using 1/4″ to 1″ size of gravel for 4″ base of pit run gravel and 1″ of top covering.

**Maths calculation:-**

1) Cubic feet of gravel = 150′ × 12′ × 5/12″ = 750 cubic feet

2) Cubic yards of gravel = 750/ 27 = 28 cubic yards

3) Tons of gravel = 28 × 1.5 = 42 tons.

**How much gravel for 200 foot driveway**

You would need approximately 1000 cubic feet, or 37 cubic yards, or 55.5 tons of gravel for 200 ft (foot) long & 12 feet wide driveway, if you are using 1/4″ to 1″ size of gravel for 4″ base of pit run gravel and 1″ of top covering.

**Maths calculation:-**

1) Cubic feet of gravel = 200′ × 12′ × 5/12″ = 1000 cubic feet

2) Cubic yards of gravel = 1000/ 27 = 37 cubic yards

3) Tons of gravel = 37 × 1.5 = 55.5 tons.

**How much gravel for 250 foot driveway**

You would need approximately 1250 cubic feet, or 46 cubic yards, or 70 tons of gravel for 250 ft (foot) long & 12 feet wide driveway, if you are using 1/4″ to 1″ size of gravel for 4″ base of pit run gravel and 1″ of top covering.

**Maths calculation:-**

1) Cubic feet of gravel = 250′ × 12′ × 5/12″ = 1250 cubic feet

2) Cubic yards of gravel = 1250/ 27 = 46 cubic yards

3) Tons of gravel = 46 × 1.5 = 70 tons.

**How much gravel for 300 foot driveway**

You would need approximately 1500 cubic feet, or 55.5 cubic yards, or 83.33 tons of gravel for 300 ft (foot) long & 12 feet wide driveway, if you are using 1/4″ to 1″ size of gravel for 4″ base of pit run gravel and 1″ of top covering.

**Maths calculation:-**

1) Cubic feet of gravel = 300′ × 12′ × 5/12″ = 1500 cubic feet

2) Cubic yards of gravel = 1500/ 27 = 55.5 cubic yards

3) Tons of gravel = 55.5 × 1.5 = 83 tons.

**How much gravel per foot of driveway**

You would need approximately 3.96 cubic feet, or 0.147 cubic yards, or 0.22 tons of gravel per foot driveway (1 foot long × 12 foot wide × 4″ deep), if you are using 1/4″ to 1″ size of gravel for 4″ base of pit run gravel and 1″ of top covering.

**How much gravel do i need for a One Car driveway**

The average single car driveway is 10 feet wide by 20 feet long. The average one car driveway needs **2.5 cubic yards**, **66 cubic feet**, or **3.75 tons** of gravel if it is 20 feet long, 10 feet wide and 4 inches deep.

**Maths calculation**:-

1) Cubic feet of gravel = 10′ × 20′ × 4/12″ = 66 cubic feet

2) Cubic yards of gravel = 66/ 27 = 2.44 cubic yards

3) Tons of gravel = 2.22 × 1.5 = 3.66 tons.

**How much gravel do i need for a 2 car driveway**

The average two car driveway is 20 feet wide by 20 feet long. The average two car driveway needs **5 cubic yards**, **132 cubic feet**, or **7.5 tons** of gravel if it is 20 feet long, 20 feet wide and 4 inches deep.

**Maths calculation**:-

1) Cubic feet of gravel = 20′ × 20′ × 4/12″ = 132 cubic feet

2) Cubic yards of gravel = 132/ 27 = 4.88 cubic yards

3) Tons of gravel = 4.88 × 1.5 = 7.5 tons.

**How much does a gravel driveway cost**

The average cost of a gravel driveway is between $1 to $3 per square foot. On an average cost of $500 for one car driveway, $1,500 for 2 car driveway and $2,000 for 3 car driveway. This includes the average cost of gravel (usually sold by the ton) and the average cost of labour (usually charged by the hour). The size and depth of the driveway is the biggest factor impacting the cost of the driveway.

**How much does a 100 ft gravel driveway cost**

The average cost of a 100 ft (foot) gravel driveway is between $100 to $300. This includes the average cost of gravel and the average cost of labour. Depth and square footage of gravel driveway is the biggest factor impacting the cost.

**How much does a 50 ft gravel driveway cost**

The average cost of a 50 ft (foot) gravel driveway is between $50 to $150. This includes the average cost of gravel and the average cost of labour. Depth and square footage of gravel driveway is the biggest factor impacting the cost.

**How much does a 150 ft gravel driveway cost**

The average cost of a 150 ft (foot) gravel driveway is between $150 to $450. This includes the average cost of gravel and the average cost of labour. Depth and square footage of gravel driveway is the biggest factor impacting the cost.

**How much does a 200 ft gravel driveway cost**

The average cost of a 200 ft (foot) gravel driveway is between $200 to $600. This includes the average cost of gravel and the average cost of labour. Depth and square footage of gravel driveway is the biggest factor impacting the cost.

**How much does a 250 ft gravel driveway cost**

The average cost of a 250 ft (foot) gravel driveway is between $250 to $750. This includes the average cost of gravel and the average cost of labour. Depth and square footage of gravel driveway is the biggest factor impacting the cost.

**How much does a 300 ft gravel driveway cost**

The average cost of a 300 ft (foot) gravel driveway is between $300 to $900. This includes the average cost of gravel and the average cost of labour. Depth and square footage of gravel driveway is the biggest factor impacting the cost.

**How much does a 2 car gravel driveway cost**

A two car gravel driveway that is 20 feet wide by 20 feet could cost between $720 to $1,800, or on an average $1,500. This includes the average cost of gravel and the average cost of labour.

**How much does a one car gravel driveway cost**

A one car gravel driveway that is 10 feet wide by 20 feet long could cost between $360 to $900, or on an average $500. This includes the average cost of gravel and the average cost of labour.

**How much does a 3 car gravel driveway cost**

A three car gravel driveway that is 20 feet wide by 30 feet long could cost between $1,080 to $2,700, or on an average $2,000. This includes the average cost of gravel and the average cost of labour.

**Conclusions:-**

You would need approximately 4,960 cubic feet, or 184 cubic yards, or 275 tons of gravel for a 1,000 foot long & 12 feet wide driveway, if you are using 1/4″ to 1″ size of gravel for 4″ base of pit run gravel and 1″ of top covering.