• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
Civil Sir

Civil Sir

A to Z Civil Guides

Search Here...


  • Brick
  • RCC
  • Tile
  • Cement
  • Concrete

How much paint is needed for a 12×12 room?

How much paint is needed for a 12×12 room? | how much paint do I need for a 12×12 room. Paint is any pigmented liquid, plastic, emulsion, cement paint, texture paint, liquefiable, or solid mastic composition that, after application to a substrate in a thin layer, converts to a solid film.

It is most commonly used to protect, color, or provide texture to wall. Paint can be made or purchased in many colors—and in many different types, such as watercolor or synthetic. Paint is typically stored, sold, and applied as a liquid, but most types dry into a solid.

Plastic emulsion paint is a water based paint which gives soft effect to the interior and exterior wall, it is long lasting, washable and easy to sustain. Cement paint parts of exterior surfaces and maintenance good look of building for many years. It offers matt finish on walls and protect house from worse weather condition.

Textured paint creates stunning effect on walls of your house it not only make inspiring taxes but also provides protection from sever weather changes like alkali and ultraviolet rays.

Before you start paint work makes sure that surface should be cleaned of dust, grease and other foreign matter, deciding on Superior quality and adequate quality of paint and mix content of paint properly to get consistency in paint work.

How much paint is needed for a 12×12 room?
How much paint is needed for a 12×12 room?

How much paint do i need for a 12×12 room? depending on various factors come into play while arriving their coverage, like types of paint, labour skills, area of wall, wet and dry condition, due to this complexity, homeowners tend to make errors of judgement in selecting types of paint and their coverage.

How much paint is needed for a 12×12 room?

You can usually make estimate how much paint you will need to buy for your home or wall project with the help of paint calculator in simple way and you can do paint calculation in such ways-

How do i calculate how much paint is needed for a 12×12 room in following steps:-

● Measure the height and width of wall of room, such as a room is in square shaped of wall height 8 feet and each wall is 12 feet

● To calculate the square footage area of the wall, multiply wall height by wall width such as 8×12 = 96 sq ft, for 4 wall of room = 96 × 4= 384 sq ft

● You can deduct area of window standard 15 sq ft and door of standard 20 sq ft minimum, so actual painting area = 384 _ (15 + 20) = 349 sq ft, hence total 349 sq ft area of wall you need to be painted. Add ceiling area of 144 sq ft, then total  + 144 = 493 sq ft, nearly equal to 500 square feet.

◆You Can Follow me on Facebook and

Subscribe our Youtube Channel

● The estimate divides the total square footage by 350 to get 1 gallon of paint coverage per sq ft, as one gallon of paint covers approximately 350 sq ft for one coat. Mathematical calculation such as 500 ÷ 350 = 1.5 gallons for 1 coat and for 2 coat painting you will need = 1.5 + (1.5 × 2/3) = 2.5 gallons of paint.

Adding second coat of paint does two things covers – it will cover bare spots left behind from the first coat and create a seal or barrier that makes the wall easier to clean. High quality paint with more pigments and resin may only require one coat.

As a general thumb rule, a gallon of paint covers approximately 350 square footage of wall of room when applying single coat of interior or exterior painting, so to calculate how many gallons of paint you will need divide the total paintable surface area by 350.

You’d need approximately 1.5 gallons or 7 litres of paint to cover a 12’x12′ room with 8-foot-high walls and ceiling for 1 coat of fresh painting and for 2 coats, 2.5 gallons or 10 litres of paint is needed.  For Repainting of 12×12 room you will need about 2 gallons or 8 litres of paint.

Regarding this, “how much paint is needed for a 12×12 room?”, usually a master bedroom sizes 12×12 feet and height is around 8 feet, according to paint calculation and a general thumb rule, on rough estimate, for repainting 5 litres or 1.5 gallon of paint is required to cover ceiling and wall and for fresh painting 8 litres or 2 gallons of paint is required to cover ceiling and wall. At least two coat paint is required for fresh paint.

How to calculate paint quantity in litres

1000 sq ft house paint cost in india

1/2 gallon paint coverage

How much interior paint do i need for a 4000 square foot house

How much interior paint do i need for a 1800 square foot house

Conclusion:-

1.5 gallons or 7 litres of paint is needed for a 12×12 room to cover with 8-foot-high walls and ceiling for 1 coat of fresh painting and for 2 coats, 2.5 gallons of paint is needed.  For Repainting of 12×12 room you will need about 2 gallons of paint.

More Important Posts:―

  1. How much does a hollow cinder block weigh
  2. How much exterior paint do i need for a 1800 square foot house
  3. How to calculate size of circular water tank and its capacity
  4. What size header for 3′, 4′, 5′, 6′, 7′, 8′, 10′ & 12 foot span
  5. How much cement required in 1750 sq.ft for roof slab casting

Primary Sidebar

Categories

  • AAC block (19)
  • Asphalt (1)
  • beam (6)
  • board (2)
  • Brick (61)
  • Cement (105)
  • Cement test types (2)
  • Compressive strength (10)
  • Concrete (294)
  • deck (6)
  • door (1)
  • drywall (20)
  • feet (1)
  • flooring (17)
  • gallon (1)
  • garage (2)
  • garage door (1)
  • gravel (6)
  • joists (8)
  • Land measurement (20)
  • mulch (2)
  • Paint/ putty calculator (21)
  • plywood (3)
  • Rate Analysis for civil work (2)
  • RCC (171)
  • Road/ highway (13)
  • Roof slab (41)
  • sand (2)
  • siding (17)
  • soil (1)
  • Soil mechanic (10)
  • span (9)
  • Tile (32)
  • Uncategorized (825)
  • wallpaper (5)
  • Weight of Steel (50)
  • सिविल नॉलेज इन हिंदी (19)

Recent Posts

  • How far can a 2×10 ceiling joist span without support
  • How far can a 2×8 ceiling joist span without support
  • How far can a 2×6 ceiling joist span without support
  • How far can a 2×4 ceiling joist span without support

Popular Post

How far can a 2×10 ceiling joist span without support

How far can a 2×10 ceiling joist span without support…

How far can a 2×8 ceiling joist span without support

How far can a 2×8 ceiling joist span without support…

How far can a 2×6 ceiling joist span without support

How far can a 2×6 ceiling joist span without support…

How far can a 2×4 ceiling joist span without support

How far can a 2×4 ceiling joist span without support…

How far can a 2x12 rafter span without support

How far can a 2×12 rafter span without support…

How far can a 2x8 rafter span without support

How far can a 2×8 rafter span without support…

Footer

About Us

At CivilSir, we share all the information related to civil engineering. So if you are a civil engineering student this is the best platform where you can improve your knowledge.

Newsletter

To get update of latest post signup below by giving you email address.

Follow Us

DMCA.com Protection Status

Copyright © 2023 CivilSir About Us Guest PostContact usPrivacy policySitemap