Rough opening for 32 inch door | rough opening for a 32 inch door | rough opening for a 32 inch interior door | rough opening for 32″×80″ interior, exterior, barn, bifold & pocket door.
If you want to make interior, exterior, barn, bifold & pocket door for your house, there is a lots of questions comes in mind what is correct rough opening for door and how to install door framing. There is few points you should know before framing.
Getting the rough opening size right the first time, will save you from tension, when installing your doors. Framing rough opening sizes are really quite simple. Just add 2 inch to the width and add 2-1/2″ to the height of the actual width and height of door respectively.
Rough openings as the size of the opening before the finished lumber has been added to the jambs. Before you add your framing, the rough opening should be larger than the door size you’ve chosen. Rough opening should be 2″ wider than the door width measured between the left and right edges. So, in a 32 inches wide door, the rough opening will be 34 inches wide.
The distance between the floor and the rough header should be two and a half inches (2-1/2″) taller than your new door’s height. For example, in a standard 80 inches-tall door, the header should be 82-1/2″ above the finished floor.
The top Header length should be 9 inches wider than the door width from left to right edges, for 32 inches wide door, header length should be 41 inches wide.
The standard door or opening width and height can vary by where you live, but is usually it is 32 inch wide by 80 inch tall (32″×80″). Door may be interior, exterior, barn, bifold & pocket door.
A sliding barn door is a door that can be installed anywhere in a house, usually featuring some sort of a wood or metal door that is hung on a sliding track. Instead of opening and closing like a traditional door, it slides to the side and hangs neatly against the wall.
A pocket door is a sliding door that, when fully open, disappears into a compartment in the adjacent wall. Pocket doors are used for architectural effect, or when there is no room for the swing of a hinged door. They can travel on rollers suspended from an overhead track or tracks or guides along the floor.
A folding door is a type of door which opens by folding back in sections or so-called panels. Folding doors are also known as ‘bi-fold doors’, in spite of them most often having more than two panels.
We refer to rough openings as the size of the opening before the finished lumber has been added to the jambs. After finishing work it will be equal as door opening. Ordering a door based on a rough opening size can leave you with a door that is too big.
◆You Can Follow me on Facebook and
Subscribe our Youtube Channel
Frame the rough opening to 2 inches wider than the door you have selected. If you are installing a 32″ wide door, the rough opening will be 34″ wide. Once finished, the door or opening will be 32″ wide. The finished opening should be the same width and height as the door you have purchased.
◆ Important Link
Frame the rough opening to a height that is two and half inches (2-1/2″) taller than the door that you have selected. If the door is 80 inches tall, frame the opening 82-1/2″ tall.
Rough opening for 32 inch door
Frame the rough opening to 2 inches wider and 2-1/2″ taller than the width and height of interior, exterior, barn, bifold & pocket door you have selected respectively.
If you have a bedroom door that is 32 inch wide (which is considered a 2/8 or 2′ 8″ door) just add 2″ to the width and frame it 34″ wide. The height is 80″ (which is considered 6/8 or 6′-8″) add 2-1/2″ to the actual door height and frame it 82-1/2″ high.
For a 32 inch door, you will need rough opening to 2 inches wider & 2-1/2″ taller than the actual door size, so, if you are installing a 32″ wide and 80″ tall or 32″×80″ interior, or barn & pocket bedroom door, the rough opening will be 34″ wide and 82-1/2″ tall or 34″× 82-1/2″. Thus, there is 34 inch wide rough opening will be required for a 32 inch door.
For 32 inch door, you will need rough opening to 2 inches wider & 2-1/2″ taller than the actual door size, so, if you are installing 32″ wide interior, exterior, barn, bifold or pocket door, the rough opening will be 34″ wide and 82-1/2″ tall.