What size beam do I need for a 14 foot span

What size beam do I need for a 14 foot span, beam size for 14 foot span, rcc beam size for 14 feet span, steel beam size for 14 feet span, wood beam size for a 14 foot span, lvl beam size for 14 feet span.

The size of the wood beam you need for a 14-foot span depends on several factors, including the type of wood you’re using, the load it will support, and local building codes. Typically, for a 14-foot span, you might need a large dimension structural beam, such as a 4×10, 4×12, or even larger, depending on the load.

Beam is generally made of reinforced concrete providing with reinforcement Steel. or made of timber, wooden structure or Laminated veneer lumber (LVL) or Glulam is one of the most widely used engineered wood products for constructional applications.

It is load bearing structure and flexural member of concrete that vertically transfer all the incoming dead load, live load and self load of rcc slab to the column via column beam joint through development length of structure element.

Size of beam generally depending on span between two support and all the load acting on it. Beam is structural member subjected to flexural stresses and shear forces. The size of the beam (width and depth of beam) are governed by the different type of shear forces and stresses.

When the beam is subjected to loading the bending moment is developed and the moment carrying capacity of the beam depends mainly on the depth of the beam.

How the size of beam could be decided?, in case of RCC beams an appropriate width of the beam is assumed on the basis of experience, the magnitude of maximum bending moment and in some cases on the basis of the width of the wall present below the beam. This width of the should be sufficient to provide rebars with sufficient side cover and spacing between the bars. After assuming the width the effective depth of the beam is calculated based on the bending moment and then the overall depth of the beam is determined by adding effective cover to the effective depth calculated.

Beam is different types like cantilever beam, continuous beam, simply supported beam, fixed beam, overhanging beam, lintel beam, primary beam and secondary beam. A cantilever beam is a rigid structural element that extends horizontally,one end is free and is supported at only one end. Simply supported beam is supported at two end and continuous beam is supported by more than two support end.

Beam is provided with the top bar which experience compression and bottom bar which experiences tension. Mainly tension bar encounter the bending moment and stirrup of which are provided to incounter the shear forces.

We can always take the standard size of the rcc concrete beam size at least 230mm x 230mm (9” x 9”) in which width and depth of beam is 230mm (9″). The depth of the beam increases or decreases according to their span and applied load on the beam. Now there is remarkable question “what size beam do i need for a 14 foot span?”.

There is various method to deciding beam size its width and depth of beam. 1) IS 456:2000, 2) Thumb rule method

1) According to IS 456:2000 for designing of minimum size of RCC column for 2- 3 storey building its recommendation is:- a) for cantilever beam span to effective depth ratio is 7 (span/effective depth=7), b) for simply supported beam span to effective depth ratio is 20 (span/effective depth=20) and c) for continuous beam span to effective depth ratio is 26 ((span/effective depth=26).

2) Thumb rule method:
You can also calculate the size and depth of the beam according to thumb rule method mention below:- 1 foot (span of the beam) = 1Inch (depth of beam), If the span of the beam is 14 feet, then the depth of the beam will be 14 inches, beam depth taken as 14″ and beam width 14/1.5= 10″, taking as 12″.

◆You Can Follow me on Facebook and

Subscribe our Youtube Channel

What size beam do i need for a 14 foot span

RCC beam size for 14 feet span:- for 14 foot span, size of reinforced beam for 2-3 storey residential building, using thumb rule, is about 10″×12″ in which beam width is 10″ and beam depth is 12″, providing with minimum of 3 nos of 12mm bar at top, 3nos of 16mm bar at bottom of Fe500 with Stirrups T8@6″C/C and M20 grade of concrete ratio (1:1.5:3) with clear cover 25mm.

Steel beam or rsj size for 14 feet span

as per general thumb rule, for 14 feet span size of steel beam or universal beam or w beam or I beam or UB’s or hot rolled section or Rolled steel joist (RSJ) should be ISMB 250 or UB 250×125 or W10 used for residential building or projects or construction in which depth of section of beam is 250mm (10″) and width of flange or width of beam is 125mm (5″). This is ideal, standard and most suitable size of steel beam or RSJ beam used for 14 feet span under normal load condition.

Wood beam size for a 14 foot span

as per general thumb rule, for a 14 foot span, size of wood beam or lumber joist should be 2×10 which placed at 16″ apart from centre used for residential building or projects or construction in which depth of section of beam is 250mm (10″) and width of beam is 50 mm or 2″. In general terms, joist or beam which spaced 16 inches apart on Centre can span 1.5 times in feet their depth in inches.

LVL beam size for a 14 foot span

as per general thumb rule, for a 14 foot span, size of LVL beam or GLULAM should be 7 to 8 inches deep and 3 inches wide, thus you need something like a 7-8″ GLULAM or LVL to span upto 14 feet and can use simple 2×10 dimensional lumber at 16″ apart from centre as floor joists used for residential building or projects.

What size beam to span 14 ft

as per general thumb rule and guidelines, a 3 nailed 2×12 or 3-2×12 or 6×12 size of wood beam can allow to span 14 ft. Thus, for a 14 foot span, you will need atleast 3-2×12 or 6×12 size of wood beam. For a 14-foot spans, the wood beam has to be at least 12 inches in depth and 6″ in width (3-2×12) used for residential building, wood frame structure or projects.

Glulam beam sizes and span calculator

How much does it cost to install a LVL beam

How far can a 4 ply 2×12, 2×10 & 2×8 beam span

LVL beam: Sizes, Cost, Span, Calculator and price

What size wood beam for 20′, 16′, 18′, 12′, 22′, 24′, 25′, 26′ & 30 feet span

Conclusion:-
For 14 foot span, size of reinforced beam for 2-3 storey residential building, using thumb rule is 10″×12″ or 7-8″ GLULAM or LVL, 2×10 dimensional lumber/wood beam at 16″ apart from centre as floor joists, ISMB 250 or UB 250×125 or W10 can span upto 14 feet that used in residential building.