# Gravel calculator for driveway

Gravel calculator for driveway | Calculating gravel for a driveway | what size gravel is best for driveway | how much gravel do I need for a 200 foot driveway.

A driveway is a type of private road, also called “drive” in UK english, used for local access to one or a small group of structures, made by using gravel and is owned and maintained by an individual or group. It has rarely have traffic lights, but some that bear heavy traffic, especially those leading to commercial businesses and parks, do.

Gravel is one of the most important building material collected from river basin, mountains, rocks, small rocks, pebbles, loose and dry sand, aggregate and pea gravel. Pea gravel is chosen best for walkway because it is round in shape of small size which make it most comfortable to work on. Gravel is made of rock is to build roads, path, driveway, Patio, pedestrian, pavement, pathways, roadways, landscaping, and etc.

When estimating the amount of gravel you need to cover your driveway, your required gravel quantity will depend on the type of gravel you choose, like pea or crushed gravel. Different grades are found in particles from fine to course, ranging from 2 to 64mm. The volume of gravel must also be calculated according to the size of the rocks. Choose the gravel you’d like to use before digging the depth of your driveway, and then figure out how much you will need by using simple calculations.

In this article you know about “Gravel calculator for driveway” and Calculating gravel for a driveway, which will help you get rough estimate how much gravel do you need. Here we provide Gravel calculator for driveway.

Depth of driveway is taken as 2 to 4 inches thick, at 2″ deep by using 1/4″ to 1/2″ size of gravel, it will cover around 100 square feet per ton, 1/2″ to 1 inch gravel will cover 90 square feet per ton, and 1 1/2″ to 2″ gravel will cover 80 square feet per ton.

## Gravel calculator for driveway

Gravel calculator for driveway: Tons of gravel = Cubic footage ÷ 21.6. Measure all dimensions of driveway in feet, multiply length by width and by thickness to determine cubic footage of driveway projects. To convert cubic feet to tons, divide the cubic feet of your project by 21.6.

To determine how many tons of gravel you need, you would first find out what the square footage of your project is by multiply the length by width. You would then multiply that answer by the depth (convert depth to feet first by dividing by 12), which provides the cubic feet of your driveway project. To convert cubic feet to yards, divide the cubic feet of your project by 27 and to convert cubic feet to tons, divide the cubic feet of your project by 21.6.

Gravel calculator formula for driveway: 1) Tons of gravel needed = Cubic footage ÷ 21.6, 2) Tons of gravel needed for driveway = Cubic yards × 1.5, 3) Yards of gravel needed for driveway = Cubic footage × 0.037 or Cubic footage ÷ 27.

### Calculating gravel for a driveway

Calculating tons of gravel for a driveway, measure the driveway in cubic feet by multiply the length by width by depth in feet, results will be divided by 27 to get quantity in cubic yards, you can multiply your total cubic yards by 1.5 to get gravel quantity in tons, because one cubic yard of gravel is equal to 1.5 tons approximately.

For example:– if your driveway is 10 foot long by 10 foot wide by 2″ high, you do the following calculation:- 1) 2″ deep in feet = 2÷12 = 0.166 feet, 2) gravel quantity in cubic feet = 10’×10’×0.166′ = 16.6 cubic feet, 3) gravel quantity in yards = 16.6 × 0.037 = 0.62 yards, 4) gravel quantity in tons = 0.62 × 0.037 × 1.5 = 0.92 tons, nearly equal as 1 ton.

Thus, you will need approximately 1 ton of gravel for 100 foot driveway at 2″ deep, if you are using 1/4″ to 1/2″ size of screened gravel for your driveway.

Calculating yards of gravel for a driveway, measure the driveway in cubic feet by multiply the length by width by depth in feet, results will be divided by 27 to get quantity in cubic yards, because one cubic yard of gravel is equal to 27 cubic feet.

For example: if your driveway is 100 foot long by 10 foot wide by 4″ high, you do the following calculation:- 1) 4″ deep in feet = 4÷12 = 0.33 feet, 2) gravel quantity in cubic feet = 100’×10’×0.33′ = 330 cubic feet, 3) gravel quantity in yards = 330 ÷27 = 12.2 cubic yards.

### What size gravel is best for driveway

The most popular and best sizes for driveway gravel are between 14mm and 20mm (1/2″ to 3/4″). Anything larger can be damaging if, for example, any of the gravel gets flicked up on to cars, and can also be difficult to walk on, although again installing Gravelrings can help stabilise your driveway and keep gravel in place.

Crushed stone is a common material to use for a driveway because it offers a nice clean look, is resistant to weeds, is affordable, is easy to maintain, and is easy to install. Gravel is commonly sold by the cubic yard, so to find the material needed for a driveway, you need to find the volume in yards.

● How much gravel for 1000 foot driveway

● Calculator for yards of gravel

### How much gravel do I need for a 200 foot driveway

To calculate amount gravel do you need for a 200 foot driveway, at 4 inches thick driveway, multiply your square footage by depth to determine cubic feet (200 ×10 × 0.33’= 660 Cu ft), to convert cubic feet to tons, the cubic feet of project divide by 21.6 (660 ÷ 21.6 = 30.5 tons. Thus, You will need approximately 30 tons of gravel for a 200 foot driveway.

:- Calculator for yards of gravel

How to figure yards of gravel

How much is a scoop of gravel

How much is a yard of gravel

How much gravel for 1000 foot driveway

Conclusion:

Gravel calculator for driveway: Tons of gravel = Cubic footage ÷ 21.6. To convert cubic feet to tons, divide the cubic feet of your project by 21.6.